Category Archives: Texa

TEXA Opabox

prod-gasbox-opabox-autopower(2)OPABOX Autopower

OPABOX Autopower is a partial flow opacity meter for diesel engines. It incorporates a latest generation exhaust gas analysis chamber developed to conform to international standards.

Thanks to Power Pack and Bluetooth technology, TEXA exhaust gas analysis solutions eliminate all those awkward cables trailing around the workshop, between the analysers and the display units, and between the analysers and the mains power supply too.

prod-gasbox-autopower(5)OPABOX Autopower is designed to be practical and versatile, and meets the full range of requirements of mechanics in the field of exhaust gas analysis.
The analysis chamber is incorporated in a practical trolley mounted on wheels with ball bearings. The analyser can therefore be moved effortlessly to the vehicle waiting to be tested.

prod-g-gasbox-opabox-02(1)_1GASBOX Autopower is an exhaust gas analyser for petrol, LPG, and methane fuelled engines. It incorporates TEXA’s own analysis chamber and comes with a practical trolley for easy movement around the workshop.

prod-g-gasbox-opabox-03(1)_1To make it even more flexible, as well as being plugged into any standard mains power socket, GASBOX can also be used with Power Pack, a practical battery module that can be removed and recharged separately. This clever solution means that you can always have one or more batteries charged and ready for use.

GASBOX Autopower

DIMENSIONS
460 x 200 x 250 mm

WEIGHT
  6,5 Kg (with trolley 15 kg)EXTERNAL POWER SUPPLY  2 x 12 V 7 A/h lead batteries; Maximum consumption: 80 W

SERIAL PORT  RS232 standard

WIRELESS OUTPUT  Bluetooth

SOFTWARE  ETS or IDC4

RESET AND CALIBRATION  electronic and automatic

TECHNOLOGY  NDIR

CONDENSATE DRAINAGE  continuous and automatic

RESPONSE TIME  < 10 seconds

HEATING TIME  Max. 60 seconds

OPABOX Autopower

DIMENSIONS
  460 x 200 x 250 mmWEIGHT  6,5 Kg (with trolley 15 kg)

EXTERNAL POWER SUPPLY 2 x 12 V 7 A/h lead batteries; Maximum consumption: 80 W

SERIAL PORT  RS232 standard

WIRELESS OUTPUT  Bluetooth

SOFTWARE  ETS o IDC4

RESET AND CALIBRATION  electronic and automatic

TECHNOLOGY  Green Led diode

HEATING TIME  maximum 5 minutes

CHAMBER LENGTH  200 mm

TEMPERATURE  75°C

Texa Uniprobe

banner-uniprobe-eng(1)
The UNIProbe is an device for analogue and digital type measurements; the best and most complete solution for all traditional diagnosis tests. The UNIProbe allows for the complete multi-make diagnosis and can intervene on cars, motorcycles, scooters, quad bikes and boats, as well as on light and heavy commercial vehicles, coaches and agricultural vehicles.

prod-g-uniprobe-03The UNIProbe communicates with all TEXA display units or with a Windows PC with USB connection or through Bluetooth technology, allowing the technician absolute freedom of movement around the vehicle and in the workshop. It’s also fitted with an interior lithium battery that can guarantee exceptional autonomy. The UNIProbe reflects the TEXA philosophy on “two unit solutions” to the full, looking to completely eliminate wires within the workshop.

prod-uniprobe-oscilloscopio-01-engUNIProbe incorporates 6 different instruments in the one unit, including an oscilloscope with four independent channels that can take accurate and professional measurements from voltage sensors and current clamps.

UNIProbe lets you test batteries, starting and charging systems, perform electrical tests on CAN networks, measure voltage and resistance using a built-in multimeter, and measure fuel pressure with an external electronic sensor.

You can even use a signal generator to simulate the PWM signals produced by sensors and the PWM power signals that drive electromechanical actuators like solenoid valves and common rail pressure regulators.
Texa_range_4

Texa Twin Probe

banner-twinprobe-engTwinProbe is the TEXA tool for acquiring the analogue and digital measurements needed for all conventional diagnostic testing. It comes at a lower price than UNIProbe, its “big brother”, however both share in common outstanding practicality and precision for all automotive service operations. TwinProbe communicates with all TEXA viewing units or with a Windows PC with USB connection or through Bluetooth Technology, allowing the mechanic absolute freedom of movement around the vehicle and in the workshop. The tool can be managed by the IDC4 operating software, or MSS (Measurement System Software) when used on a PC.

OSCILLOSCOPE

TwinProbe is an oscilloscope with two independent analogue channels for inputs up to ± 200V, complete with SIV (Signal information Viewing ) function for interpreting the measured signal. The SIV function guides you through the entire test procedure. TwinProbe not only displays the signal but, while taking measurements and acquiring data, simultaneously processes and analyses information in order to provide real time evaluations. TwinProbe can process signals from various sensors and actuators and compare the data acquired against values stored in the internal database, immediately highlighting any signal anomalies.

SIGNAL GENERATOR

The practical TwinProbe signal generator is ideal for simulating input signals from sensors and the signals transmitted by ECUs to control actuators like solenoid valves, in order to detect and analyse faults in the system.

AMMETER

TwinProbe can also be used to measure current intensity. An optional BICOR clamp-on ammeter is needed to allow TwinProbe to run these tests.

prod-uniprobe-oscilloscopio-01-engMEASUREMENT SYSTEM SOFTWARE

Easy access to the amazing functions of TwinProbe is ensured by MSS (Measurement System Software), developed by TEXA especially for this device, and by the complete IDC4 software Platform.

The SIV (Signal Information Viewing) function deserves a special mention. This uses a software algorithm developed by TEXA specifically to compare acquired data with values recorded in an internal database. Unusual signals can therefore be identified instantly, making your work faster and easier than ever.

Petroject Videos

2010-11-17 19.48.29Petroject deliver training across the country, ranging from small sessions to larger multi day seminars. The problem with Training in New Zealand is it can be long winded, irrelevant, or just too difficult to access.
We love to get out on the road and bring World Class training to your area.

Course modules available for workshops include:
• EFi Component testing
• Oscilloscopes
• Scan tool Essentials
• Advanced Scanning
• Better Business development
• CAN networks (of course!)
• Fly-by-wire
• Ignition taming
• Gas Analysis and many more

We also have a range of videos to assist you too:-

Hanatech Scan tool demonstration  |  Bosch KTS Software instal
Hanatech Software updates  |  Bosch Scan Tool Demo
Diagnostics of Distinction Conference

 

 

Equipment

Petroject bring you a vast range of specialist equipment and accessories, and provide world class training with specialist seminars to local evening sessions to suit you.

Scan Tools

Autel MaxiDas DS708 – DS908 • Bosch • Calibre PDC 150 • G Scan2

 Hanascan 10Hanatech Multi & Ultrascan • DEC Superscan3

Launch X431Texa AXONE 4 MiniTexa Nano  • Texa Nano Diag  • Texa Navigator TXT

Oscilloscopes

 Bosch • Hanascope 80110111Hanatech UltrascopeTexa UniprobeTEXA TwinProbe

 Emissions

TEXA Multipegaso  •   TEXA Opabox

Hanatech Ultragas 4/5  • Wager 6500

 Electrics

Accessories

 Carbon Clean • TransTech MTT 1150 • SAOT Break out BoxFuel Pressure Tester

EPS 100 Injector tester • Hanatech LeakDetector • HID Lighting

Impact 500 • Tyre Pressure Monitor • Inspection Camera

Launch Fuel Injector Clean/est bench •  Hoists