Category Archives: Support

PlusQuip Battery Test Tools

Plusquip12 Volt Battery Tester – PlusQuip EQP-113
The EQP-113 uses the latest battery testing technology for fast, accurate and consistent results, utilising a clear illuminated LED display which eliminates any results interpretation misunderstanding.
A clear indication on whether the battery requires charging and then retesting, replacement due to a poor performance result, or the battery is acceptable for further service allows for a confident report on the battery condition.
Tests a wide range of 12 Volt batteries including: AGM, VRLA, SMF, GEL, etc. Cold Cranking Amps: 100 – 1700

Battery & Electrical System Tester PlusQuip EQP-114
12V Battery and Electrical System Tester. Lightweight easy to use cost effective tester includes printer. Tests include Battery Load and Condition test, Alternator Test, Grounding Test, Starter Test

PlusQuip Test equipment videos

Find the must have test tools to solve your diagnostic needs from PlusQuip
Plusquip
OBDII Black Box Recorder – PlusQuip EQP-104.
This ultra-compact all-in-one data recorder is extremely useful for those difficult to diagnose intermittent vehicle electrical component faults on vehicles supporting OBDII system.

Wheel Speed Sensor and Circuit Tester – PlusQuip EQP-111
Wheel Speed Sensor and Circuit Tester. PlusQuip EQP-111 is the quickest, most comprehensive Wheel Speed Sensor diagnostic tester available. This Automotive Wheel Speed Sensor and Circuit Tester is the quickest way to verify proper wheel speed sensor operation.
◦Works on all old and new style wheel speed sensors

Electronic EGR, Throttle Body & Actuator Tester – PlusQuip EQP-115
Save time & money by testing the component first!
The PlusQuip EQP-115Tester is capable of accurately driving both DC and Pulsed Width Modulated (PWM) components on today’s complex vehicles from 0 – 100% to accurately test operation.

Hanatech Software update Video

Lawrence Fisher guides you through the updating process for Hanatech Scan tools using HostPro software

A current subscription will enable you to use your Hanatech service tool to the best of it’s abilities. We strongly recommend that the machine gets plugged in via USB and updates are run regularly. This will enable the machine to run at it’s optimised best. We strongly advise you to set a reminder on your PC about running updates, and plugging it in at night leaves it ready to go in the morning!

Hana_mechThe Hanatech technicians regularly update software and patches for updates on a range of vehicles including cars from Japan, which is ideal for the range of imports that we see on our shores. Also, having a machine in current subscription allows the technician to select from previous options of software (Rolling) to best serve the vehicle you have in your workshop.

TRIAL

After running the latest updates, the machine will time out from HostPro. We strongly urge you to re-connect and repeat the procedure, BUT instead of “Latest Version” select “TRIAL” version from the drop down box at the top, and run this option. It will NOT over ride latest versions, but will give you TRIAL versions which is where Hanatech development work is being undertaken, and you can use these options for scanning vehicles as well. Which will give you a greater range on your service tool.

Rolling? Forward and back

So much data and functions is crammed into these 512mb cards, so inevitably it can get a bit crammed, and NO Communication Errors occur, nothing can be worse than plugging into a regular visitor, and NOT being able to scan, so this necessitates the need to roll the software. To do this, connect scan tool to Host-Pro but instead of selecting “Scan Latest Version” change this to Scan Previous or Scan OLD versions. But do NOT select ALL manufacturers, just the make of vehicle that you are working on, and Update the software to either of these, and this will increase the range of vehicles and options available to you. BUT for good working practices, ROLL the software back to latest versions after you have finished.

Click here to download HostPro software 1.78.

How to Uninstall Host Pro

If you can’t uninstall Host Pro Ver, please follow below procedure.

STEP 1. Disconnect USB from PC.

STEP 2. Reboot PC.

STEP 3. Download HostProSetup.exe file.

STEP 4. Double click HostProSetup.exe file.

 

 

Petroject Videos

2010-11-17 19.48.29Petroject deliver training across the country, ranging from small sessions to larger multi day seminars. The problem with Training in New Zealand is it can be long winded, irrelevant, or just too difficult to access.
We love to get out on the road and bring World Class training to your area.

Course modules available for workshops include:
• EFi Component testing
• Oscilloscopes
• Scan tool Essentials
• Advanced Scanning
• Better Business development
• CAN networks (of course!)
• Fly-by-wire
• Ignition taming
• Gas Analysis and many more

We also have a range of videos to assist you too:-

Hanatech Scan tool demonstration  |  Bosch KTS Software instal
Hanatech Software updates  |  Bosch Scan Tool Demo
Diagnostics of Distinction Conference

 

 

Hanatech Feedback form

Hanatech LogoL
Feedback from qualified technicians about the Hanatech machine and software is invaluable, and helps us develop the service tool further. Please take time to complete the form below, listing as many details  as possible. Wherever possible, if we are aware of a fix or solution we can advise you, but a response will come from Hanatech and we will do our utmost to advise you of the results, and wherever possible it will result in a further update.

We thank you for your co-operation.

 

Hanatech Multi/Ultrascan support

Hana_ECAE_15

Mike & Adam Ross of East City Auto Electrical. First owner of a Hanatech in NZ. 15 years ago, and Mike says he still uses his trusty ol’ DCN-Pro!

A current subscription will enable you to use your Hanatech service tool to the best of it’s abilities. We strongly recommend that the machine gets plugged in via USB and updates are run regularly. This will enable the machine to run at it’s optimised best. We strongly advise you to set a reminder on your PC about running updates, and plugging it in at night leaves it ready to go in the morning!

The Hanatech technicians regularly update software and patches for updates on a range of vehicles including cars from Japan, which is ideal for the range of imports that we see on our shores. Also, having a machine in current subscription allows the technician to select from previous options of software (Rolling) to best serve the vehicle you have in your workshop.

TRIAL

After running the latest updates, the machine will time out from HostPro. We strongly urge you to re-connect and repeat the procedure, BUT instead of “Latest Version” select “TRIAL” version from the drop down box at the top, and run this option. It will NOT over ride latest versions, but will give you TRIAL versions which is where Hanatech development work is being undertaken, and you can use these options for scanning vehicles as well. Which will give you a greater range on your service tool. (And don’t forget to keep these updated too!)

Rolling? Forward and back

hostpro

So much data and functions is crammed into these 512mb cards, so inevitably it can get a bit crammed, and NO Communication Errors occur, nothing can be worse than plugging into a regular visitor, and NOT being able to scan, so this necessitates the need to roll the software. To do this, connect scan tool to Host-Pro but instead of selecting “Scan Latest Version” change this to Scan Previous or Scan OLD versions. But do NOT select ALL manufacturers, just the make of vehicle that you are working on, and Update the software to either of these, and this will increase the range of vehicles and options available to you. BUT for good working practices, ROLL the software back to latest versions after you have finished.

Click here to download HostPro software 1.78.